Telephoto Zoom Lens

Canon RF 70-200mm F4L IS USM

Specifications

Specifications

  • F4 constant maximum aperture

    For great performance in everyday situations

  • Dual Nano USM

    For smooth, fast and near silent continuous focusing

  • UD elements and ASC coatings

    For exceptionally sharp, high contrast images

  • 5-stop Optical Image Stabilizer

    Exceptional stability in the lowest of light levels

  • Dust and water resistant seals

    Offering weather resistance and durability

  • Lens Control Ring

    Change settings while still viewing the subject

Specifications in detail

Optical Features / Specifications

  • Image Size
    Full Frame
  • Angle of View (Horizontal, vertical, diagonal)
    29° - 10°,
    19° 30' - 7°,
    34° - 12°
  • Lens Construction (Elements/Groups)
    16 / 11
  • Number of Diaphragm Blades
    9
  • Minimum Aperture
    32
  • Closest Focusing Distance (m)
    0.6
  • Maximum Magnification (x)
    0.28
  • Distance Information
    Yes
  • Image Stabilizer OIS1
    52
  • AF Actuator
    Dual Nano USM

Accessories

  • Lens Cap
    E-77II
  • Lens Hood
    ET-83G (WIII)
  • Lens Case/Pouch
    LP1319
  • Rear End Cap
    Lens Dust Cap RF
  • Extender Compatibility
    Not compatible

Physical Specifications

  • Dust/Moisture Resistance
    Yes3
  • Filter Diameter (mm)
    77
  • Max. Diameter x Length (mm)4
    83.5 x 1195
  • Weight (g)
    695

Although the lens features dust- and water-resistant construction, this cannot completely prevent dust or water droplets from entering the lens. 

  1. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  2. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  3. Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause slight abrasion of the camera mount. This in no way effects either the lens or camera performance.
  4. Lens dimensions when in retracted state
  5. Lens dimensions when in retracted state