Canon DP-V2730

Specifications

Specifications in detail

Panel

• Panel Type
  a-Si TFT Active Matrix LCD Panel
• Screen Size
  27 inch (68.5 cm)
• Aspect Ratio
  16:9
• Resolution
  3840 x 2160 (8.3 megapixels)
• Active Display Area
  Approx. 596.7x335.7 mm
• Pixel Pitch
  155.4 μm

Image Quality

• Brightness
  Standard: 100 cd/m2
  Peak, Full screen white: 1,000 cd/m2¹
• Viewing Angle (Up, Down, Left, Right)
  89° (contrast ratio 10:1 or higher)
• Surface Treatment
  Anti glare coating

General

• Backlight Type
  LED, Matrix Array
• Power
  Rated voltage: AC 100 - 240 V Rated frequency: 50/60 Hz
• Power Consumption
  At maximum load (including luminance changes over time): Approx. 380W
  At factory shipment: Approx. 125 W
  In standby mode: 0.5W or less
• Environmental Conditions
  Usage
  Temperature and humidity: 0 to 40℃ (32 - 104°F) (20 - 85 % RH no condensation）
  Recommended: 15 - 30 ℃ (59 - 86 °F) (20 - 80% RH no condensation)
  Pressure: 700 - 1060 hPa
  
  
  Storage/Transporting
  Temperature and humidity: -20 to 40℃ (-4 - 104°F) (20 - 85 % RH no condensation）
  41 to 60℃ (105 - 140°F) (20 - 30 % RH no condensation）
  Pressure: 700 - 1060 hPa
• Dimensions (W x H x D)
  Approx. 635×447×214mm (including stand and handle)
  Approx. 635×426×158mm (display unit only, without protruding parts)
• Weight
  Approx. 16.0 kg
• Mounting Hole Pitch
  VESA standard 200x100 mm

Interface

• Input
  12G/6G/3G/HD/SD-SDI: 4x BNC (75 Ω) terminals
  12G-SDI: SMPTE 2082 compliant
  6G-SDI: SMPTE 2081 compliant
  3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
  HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
  SD-SDI: SMPTE 259M compliant
  
  HDMI: 1x Type A terminal
  Copy protection: HDCP 2.3 / 1.4
• Output
  12G/6G/3G/HD-SDI: 4x (Pass-through) BNC (75 Ω) terminals
  MULTIFUNC. SDI OUT²: 1x BNC (75 Ω) terminal
  Speakers: 2W (stereo)
  Headphone / Audio Output: 2x stereo mini-jacks (front / rear), supported impedance: 32 Ω - 64 Ω
• Others
  USB: 1x USB A receptacle terminal Universal Serial Bus Specification Revision 3.0 compliant
  
  LAN: 1x RJ-45 terminal IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T compliant
  
  GPI: 1x RJ-45 terminal