Ultra-Wide Zoom Lens

Canon RF 14-35mm F4L IS USM

Specifications

Specifications

  • 14-35mm

    Superb wide-angle field-of-view

  • Image Stabilizer

    5.5-stops of stabilisation for shake-free images

  • Aspherical and UD

    For exceptionally sharpness and contrast

  • Nano USM motor

    For smooth, fast and silent operation

  • Subwavelength structure coating

    To prevent flare and ghosting

  • Lens Control Ring

    For extra control over ISO, aperture or other functions

Specifications in detail

Optical Features / Specifications

  • Image Size
    Full Frame
  • Angle of View (Horizontal, vertical, diagonal)
    104°00′ – 54°00′
    81°00′ – 38°00′
    114°00′ – 63°00′
  • Lens Construction (Elements/Groups)
    16/12
  • Special Optics
    3 x GMo Aspherical,
    3 x UD ( 1 element both UD / Aspherical)
  • Number of Diaphragm Blades
    9
  • Minimum Aperture
    22
  • Closest Focusing Distance (m)
    0.2
  • Maximum Magnification (x)
    0.38 (35mm)
  • Control Ring
    Yes
  • Image Stabilizer OIS1
    5.52
  • Image Stabilizer IBIS x OIS3
    74
  • AF Actuator
    Nano USM
  • Coatings
    ASC, Super Spectra, SWC
  • Fluorine
    Front

Accessories

  • Lens Cap
    E-77 II
  • Lens Hood
    EW-83P
  • Lens Case/Pouch
    LP1219
  • Rear End Cap
    Lens Dust Cap RF
  • Extender Compatibility
    Not Compatible

Physical Specifications

  • Dust/Moisture Resistance
    Yes5
  • Exterior Coating
    Yes
  • Filter Diameter (mm)
    77
  • Max. Diameter x Length (mm)6
    84.1 x 99.87
  • Weight (g)
    540

Although the lens features dust- and water-resistant construction, this cannot completely prevent dust or water droplets from entering the lens.

  1. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  2. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  3. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  4. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  5. Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause slight abrasion of the camera mount. This in no way effects either the lens or camera performance.
  6. Lens dimensions when in retracted state
  7. Lens dimensions when in retracted state