Canon DP-V3120
Specifications

IPS LCD panel

31.1 inch (79.0 cm)

17:9

4096×2160 (8.8 megapixels)

Approx. 698.0×368.1 mm

170 μm/149 ppi

Standard
100 cd/m²

Peak, Full screen white
2,000 cd/m²

* Brightness values are standard values and not guaranteed values.

89° (contrast ratio 10 : 1 or higher)

Anti glare coating

LED, Matrix Array

Rated voltage: AC 100 - 240 V
Rated frequency: 50/60 Hz

At maximum load (including change in brightness due to aging): Approx. 840W
At factory shipment: Approx. 175 W

Usage
Temperature and humidity: 5 - 35 ℃ (20 - 85% RH no condensation)
Recommended temperature and humidity: 15 - 30 ℃ (20 - 80% RH no condensation)
Pressure: 700 - 1060 hPa

Storage/Transporting
Temperature and humidity: -20 - 40 ℃ (10 - 85% RH no condensation)
41 - 60 ℃（10 - 30% RH no condensation)
Pressure: 700 - 1060 hPa

Approx. 749×492×335 mm (including handle)
Approx. 749×470×295 mm (Display unit only, without protruding parts)

Approx. 31 kg

VESA standard　200×200 mm

12G/6G/3G/HD/SD-SDI
4 (1 channel) BNC (75 Ω) Receptacle terminal
12G-SDI: SMPTE 2082 compliant
6G-SDI: SMPTE 2081 compliant
3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: SMPTE 259M compliant

HDMI
1 Type A
Copy protection: HDCP 2.2

12G/6G/3G/HD-SDI
4 (Pass-through 1 channel)

Headphone
1 stereo mini-jack, supported impedance: 32 Ω - 64 Ω

USB
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant

LAN
1 RJ-45 terminal
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant

REMOTE
1 RJ-45 terminal, GPI 8 pin