Canon releases FPA-3030i6 semiconductor lithography system for small wafers, with a newly developed lens and a variety of options to meet the growing demand for power devices

United Kingdom, Republic of Ireland, 24th September 2024 - Canon Inc. announced today the release of the FPA-3030i6 i-line1 stepper, a new semiconductor lithography system for processing wafers with a diameter of 8 inches (200 mm) or smaller.

FPA-3030i6

The newly developed lens is notable for high transmittance compared to previous lenses (conceptual image)

The FPA-3030i6 employs a newly developed projection lens that boasts high transmittance and high-durability. The system reduces lens aberration for high exposure dose processes and improves productivity by shortening exposure time.

The lens is made of high-transmittance glass material that reduces lens aberrations occurring during exposure by more than 50%2 when compared to previous stepper models3. Higher transmittance also helps reduce exposure time while maintaining pattern fidelity, even under high exposure dose conditions.

Improving lens transmittance will also increase exposure intensity and shorten the exposure time required for each process. The FPA-3030i6 standard productivity for 8 inch (200 mm) wafers has increased4 to 130 wafers per hour from 123 for the previous stepper models.

Additionally, since the lens is highly durable, lens transmittance decrease over time is reduced and productivity can be maintained over the life of the system.

The NA (numerical aperture) range has also been expanded from 0.45~0.63 in the previous model to 0.30~0.63. Allowing for a smaller NA enables customers to select the optimum NA for each device layer.

Optional products including a wafer handling system for special substrates are available for order to meet users’ manufacturing needs for various emerging semiconductor devices including high-power and high-efficiency green devices.

The FPA-3030i6 is designed to support a wider range of device fabrication thanks to a variety of available process options for silicon (Si) as well as sapphire and compound semiconductor materials such as silicon carbide (SiC), gallium nitride (GaN) and gallium arsenide (GaAs) substrates.

Canon will offer wafer feeding options enabling handling of substrates from 2 inches (50 mm) to 8 inches (200 mm) in diameter, as well as thick, thin and warped substrate handling.

  1. Semiconductor lithography equipment using i-line (Mercury lamp, wavelength 365 nm) light source 1 nm (nanometer) =1/1 billion meter
  2. Under Canon's standard exposure conditions
  3. FPA-3030i5a (released in March 2021)
  4. 8 inch (200 mm) wafer