Cleaning the Inside of the Machine (Bottom Plate Cleaning)

Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.

You need to prepare: a sheet of A4 or Letter-sized plain paper*
* Be sure to use a new piece of paper.

1. Make sure that the power is turned on.

2. Open the paper output tray gently, and open the output tray extension.

3. Clean the inside of the machine.

(1) Select Setup on the HOME screen.
The setup menu screen will appear.

(2) Select Maintenance, then press the OK button.
The Maintenance screen will appear.

(3) Select Bottom plate cleaning, then press the OK button.

The confirmation screen will appear.

(4) Select Yes, then press the OK button.

(5) Follow the message to remove any paper from the rear tray, then press the OK button.

(6) Follow the message to fold a single sheet of A4 or Letter-sized plain paper in half widthwise, unfold the paper, then press the OK button.

(7) Follow the message to load only this sheet of paper in the rear tray with the open side facing you, then press the OK button.

Load the paper (A) after unfolding it.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning again.

(8) When the completion message appears, press the OK button.
The screen will return to the Maintenance screen.

If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Clean them according to instructions.
Refer to [ Cleaning the Protrusions inside the Machine ] within this webpage.

Cleaning the Protrusions inside the Machine

You need to prepare: cotton swab
If the protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like.

• PIXMA MG5340
• PIXMA MG5350