LCOS reflective display, TFT Active Matrix
0.71” diagonal, 3 panels
16:10
1920 x 1200 (WUXGA), 2304000 pixels
280W NSHA
F2.7; f=8.8mm
1.0x Optical (fixed)
Manual
Vertical: 0% to +75%, Manual
Horizontal: +/-10%, Manual
5000 lumens (3460 lumens in Eco Mode)
5000 lumens (3460 lumens in Eco Mode)
80%
2000:1
0.35m – 3.64m (1.2m for 100" image)
30” - 300” (65 x 40cm - 646 x 404cm)
0.56 : 1
12x max
Vertical: +/-12°
Horizontal: +/-12°
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / FWXGA / WXGA / SXGA / XGA / SVGA / VGA
1080p / 1080i / 720p / 576p / 480p
1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Equivalent to the input for HDMI terminal
Standard / Presentation / Dynamic / Photo/sRGB / Video / User 1-5 / DICOM sim (only available on DICOM projector model)
JPEG still image
5.0W RMS, Monaural
DVI-I 29-pin (shared)
HDMI (supporting Deep Colour)
DVI-I 29-pin (shared)
Mini D-Sub 15-pin (Component via optional adaptor cable)
3.5mm stereo mini-jack
3.5mm stereo mini-jack
3.5mm stereo mini-jack (variable level)
USB Type A
Mini D-Sub 9-pin
RJ-45 (1000BASE-T / 100BASE-TX / 10BASE-T)
RJ-45 (HDBaseT) – see table below
3.5mm stereo mini-jack
IEEE 802.11b / g / n. Approx 25m. Infrastructure mode & PjAP mode
Push button method (PBS) & PIN code method (PIN)
Open / WEP / WPA-PSK TKIP / WPA-PSK AES / WPA2-PSK TKIP / WPA2-PSK AES
Two rotary feet, 6° maximum image elevation
337mm x 136mm x 415mm
6.3kg
100V - 240V AC, 50/60Hz
Normal Mode: 395W / Eco Mode: 295W / Standby: 1.8W / Standby (LAN & HDBaseT off): 0.2W
3000 hr / 5000 hr (Eco mode)
38dBA / 30dBA (Eco mode)
0°C to +40°C, 20%RH - 85%RH
-20°C to +60°C
All data is based on Canon standard testing methods except where indicated
Subject to change without notice.
HDBaseT Transmitter operation confirmation chart
A transmitter and a receiver is required to create an HDBaseT system. Normally, HDBaseT entails an external receiver and transmitter, and if these devices are made by the same manufacturer, their performance is usually guaranteed. However, because WUX500ST has a built-in receiver, the receiver and transmitter used will be made by different manufacturers. For this reason, in the list below, confirm that the transmitter you are using works with the projector before use. (Canon does not guarantee operations)
| Brand | Model | Video | Audio | LAN | Serial |
| Crestron | DM-TX-201C | Yes | Yes | Yes | No |
| DM-TX-401C | Yes | Yes | Yes | No | |
| AMX | DX-TX | Yes | Yes | Yes | Yes |
| Kramer | TP-581T | Yes※1 | Yes | Yes | Yes |
| TP-582T | Yes | Yes | Yes | Yes | |
| Gefen | GEF-HDCAT5-ELRPOL | Yes | Yes | No※2 | No |
| Atlona | AT-HDTX-RSNET | Yes※1 | Yes | Yes | No |
| CYP | PU-507-KIT | Yes※1 | Yes | Yes | Yes |
| IDK | HDC-TH100-C | Yes | Yes | Yes | No※3 |
| IMAGENIX | CRO-DE20TX | Yes | Yes | No | No※3 |
※1 When a certain input device is connected, the picture may not be displayed in intended resolution.
※2 LAN transmission disabled when the projector is in Standby mode (Transmitter is incompatible with LPPF2 mode)
※3 Serial transmission disabled when the projector is in Standby mode.